gi_zk2banner

Intelligent VME-Bus plugin board with
6 counters 9513AJC

With maximum expansion the board has 30 16-bit counters. 24 counters have an external input.
The output of 12 PWM-Signalen is possible via the open-collector drivers, that either are fed external- or internal. 
The counter inputs are via Schmitt-Trigger-Inverter and pre-decoders, wich allow a logic pre-processing of signals.
The signals are fed over a 50-plug SubD front port.

 

bo_zk2_sp3.jpg
Spezifikationen  

  • Counter module:
  • Counters:
  • Counter steps:
  • Input:
  • Output:
  • Power supply:
  • operation temperature:
  • Air humidity:
  • Storage temperature:
  • Board Dimensions:
  • Front Panel width:
  • Front Panel height:
  • VME-Bus connector:

  • 6 Counter modules 9513AJC
  • 30
  • 16 Bit
  • Schmitt-Trigger
  • Open-Kollektor
  • 5V ± 5%
  • 0°C to + 70°C
  • 0% to 90% not condensed
  • -55°C to +85°C
  • Eurocard
  • 4 TE (20,3 mm), 1 Slot
  • 3 HE
  • DIN 41612, Typ C, 96-Pins
   
Bestellinformationen  
   

Pricing and ordering information on inquiry.

 

   

Ordering name

 

Description

 

  • GI0ZK2.6RS

  • VME-Bus Karte ZK2 with 6 counters 9513AJC
    standard predecoding

 

standard product

 


Optionen  
   

For further information please contact Gi-Electronic.
All data without guarantee, technical subject to change.

 

 

 

 

gi_canbanner


Intelligent High-Speed CAN-Board with DSP for
4 physical CAN-Channels


A Texas Instruments digital processor with dual-ported-RAM in connection to the VME bus
is managing 4 Intel 82527 CAN controllers.
The 4 seperated CAN channels can be bundeld to less lines by using jumpers.
The CAN drivers can be easily replaced.
the board comes with an integrated JTAG interface to match the requiremnts of fast.
The address range of 128kB is selectable from 64 sub spaces via a hex switch.
The board is usable for poling or interrupt operations. Programms are execuded either from the flash-EPROM, which can be programmed from the host system, or from the internal RAM of the DSP (Dual-Portet-RAM). 
A variable boot possibility over the VME bus or the flash EPROM assures the flexible operation of the board in standalone or hostbased usage.

 

gi0can_sp4
Spezifikationen  

  • Channels:
  • Bus:
  • Bus, max. transfer rate:
  • Bus, termination:
  • CAN data output:
  • CAN controller:
  • Processor:
  • Memory:
  • -
  • -
  • -
  • Power:
  • -
  • Consumption avg.:
  • -
  • Operating temp.:
  • Air humidity:
  • Storage temperature:
  • Board dimensions:
  • Front Panel width:
  • Front Panel height:
  • VME-Bus connector:

  • 4 independent, galvanic seperated CAN-channels
  • CAN-Bus, CAN 2.0 specification
  • 1MBaud
  • switchable termination
  • 4x  2- or 4-plug Lemosa ports
  • 4x Intel AN82527
  • TMS320C206 (50ns Zykluszeit)
  • 128 kB virtuelles DPRAM
  • 128 kB externes Flash-EPROM
  • 544 Wort DSP-internes DRAM
  • 4 kWort DSP-internes SRAM
  • 1. 5V DC (± 5%)
  • 2. 12V DC (± 5%)
  • 1. 700 mA (5V)
  • 2. 200 mA (12V)
  • 0°C bis + 70°C
  • 0% to 90% not condensed
  • -55°C to +85°C
  • Simple Euro-Card
  • 4 TE (20,3 mm), 1 Slot
  • 3 HE
  • DIN 41612, Typ C, 96-Pins
   
Bestellinformationen  
   

Pricing and ordering information on inquiry

 

   

Ordering number

Description

   
  • GI0CAN.600 *

  • VME-Bus Board GI0CAN with processor TMS320F206 (50ns)
    High Speed, 2-plug Lemosa port
  • GI0CAN.601 **

  • VME-Bus Board GI0CAN with processor TMS320F206 (50ns)
    Low Speed, 4-plug Lemosa port

 

* on inquiry

** special customer product

 


Optionen  
   

For further information please contact Gi-Electronic.
All data without guarantee, technical subject to change.

 

 

gi_dspbanner









Intelligent VME-Bus plugin board with DSP,
4 analouge outputs and customer specific options


The can board is especially made for tasks that requires fast signal processing via DSP.
The customer specific application is done via a plugin piggy-back unit.
4 analouge values are already outputted via SubD ports.
In standalone mode an integrted DC/DC-converter supplies the processor with power so there is only supply voltage neccesary.
The board has an integrated JTAG interface to match the requirements of fast application development. The address range of 128kB is selectable from 64 sub spaces via a hex switch.
The board is usable for poling or interrupt operations. Programms are execuded either from the flash-EPROM, which can be programmed from the host system, or from the internal RAM of the DSP (Dual-Portet-RAM). 
A variable boot possibility over the VME bus or the flash EPROM assures the flexible operation of the board in standalone or hostbased usage. 

gi0dsp_sp3
Specifications  

  • D/A converter with PB401:
  • Channels:
  • Resolution with PB201, PB202:
  • Resolution with PB401:
  • Convert time with PB201, PB202:
  • Convert time with PB401:
  • DA output voltage:
  • Output current max:
  • Processor:
  • Memory:
  • -
  • Input voltage:
  • -
  • Power consumption avg.:
  • -
  • -
  • Operation temperature:
  • Air humidity:
  • Storage temperature:
  • Board dimensions:
  • Front Panel width:
  • Front Panel height:
  • VME-Bus connector:

  • not available
  • 4 independend D/A output channels
  • 12 Bit
  • 8 Bit
  • 6 us per data word
  • 100 ns per data word
  • ± 10V
  • 35 mA (short circuit current OPA4277)
  • TMS320C206 (25ns cycle time)
  • 128 kB virtual DPRAM
  • 128 kB Flash-EPROM (Piggy-Back)
  • 5V DC und 12V DC (± 5%) at VME-Bus operation
  • 12V DC (± 5%) bei standalone operation
  • 700 mA (5V) at VME-Bus operation (with PB modul)
  • 200 mA (12V)
  • 900 mA (12V) at standalone operation (mit PB-Modul)
  • 0°C bis + 70°
  • 0% to 90% not condensed
  • -55°C to +85°C
  • simple euro card
  • 4 TE (20,3 mm), 1 Slot
  • 3 HE
  • DIN 41612, Typ C, 96-Pins
   
Ordering information
 
   

Pricing and delivery on inquiry.

 

   

Ordering name:

Description:

   
  • GI0DSP.201 **

  • VME-Bus board GI0DSP with processor TMS320C206 (25ns)
    with piggyback PB201
  • GI0DSP.202 **

  • VME-Bus Karte GI0DSP with processor TMS320C206 (25ns)
    with piggyback PB202
  • GI0DSP.401 **

  • VME-Bus Karte GI0DSP with processor TMS320C206 (25ns)
    with piggyback PB401

** customer specific product


Information  
   

For further information please contact Gi-Electronic.
All data without guarantee, technical subject to change.

 

vmeboardsbanner







gi0dsp_sp3 bo_zk2_sp3

GI_DSP
with DSP and analog/digital out

GI_ZK2
with 16-bit counters

gi0can_sp4

 

special VME boards with:

  • ARM-processors
  • Dual Ported RAM (DPRAM)
  • Flash/EEPROM
  • Analog OUT
  • LIN
  • CAN
  • Add-On Piggy-Backs

GI_CAN
with DSP and CAN controllers

 
Main Page Contacts Contacts
Cookies make it easier for us to provide you with our services. With the usage of our services you permit us to use cookies.
Ok Decline