gi_dspbanner









Intelligent VME-Bus plugin board with DSP,
4 analouge outputs and customer specific options


The can board is especially made for tasks that requires fast signal processing via DSP.
The customer specific application is done via a plugin piggy-back unit.
4 analouge values are already outputted via SubD ports.
In standalone mode an integrted DC/DC-converter supplies the processor with power so there is only supply voltage neccesary.
The board has an integrated JTAG interface to match the requirements of fast application development. The address range of 128kB is selectable from 64 sub spaces via a hex switch.
The board is usable for poling or interrupt operations. Programms are execuded either from the flash-EPROM, which can be programmed from the host system, or from the internal RAM of the DSP (Dual-Portet-RAM). 
A variable boot possibility over the VME bus or the flash EPROM assures the flexible operation of the board in standalone or hostbased usage. 

gi0dsp_sp3
Specifications  

  • D/A converter with PB401:
  • Channels:
  • Resolution with PB201, PB202:
  • Resolution with PB401:
  • Convert time with PB201, PB202:
  • Convert time with PB401:
  • DA output voltage:
  • Output current max:
  • Processor:
  • Memory:
  • -
  • Input voltage:
  • -
  • Power consumption avg.:
  • -
  • -
  • Operation temperature:
  • Air humidity:
  • Storage temperature:
  • Board dimensions:
  • Front Panel width:
  • Front Panel height:
  • VME-Bus connector:

  • not available
  • 4 independend D/A output channels
  • 12 Bit
  • 8 Bit
  • 6 us per data word
  • 100 ns per data word
  • ± 10V
  • 35 mA (short circuit current OPA4277)
  • TMS320C206 (25ns cycle time)
  • 128 kB virtual DPRAM
  • 128 kB Flash-EPROM (Piggy-Back)
  • 5V DC und 12V DC (± 5%) at VME-Bus operation
  • 12V DC (± 5%) bei standalone operation
  • 700 mA (5V) at VME-Bus operation (with PB modul)
  • 200 mA (12V)
  • 900 mA (12V) at standalone operation (mit PB-Modul)
  • 0°C bis + 70°
  • 0% to 90% not condensed
  • -55°C to +85°C
  • simple euro card
  • 4 TE (20,3 mm), 1 Slot
  • 3 HE
  • DIN 41612, Typ C, 96-Pins
   
Ordering information
 
   

Pricing and delivery on inquiry.

 

   

Ordering name:

Description:

   
  • GI0DSP.201 **

  • VME-Bus board GI0DSP with processor TMS320C206 (25ns)
    with piggyback PB201
  • GI0DSP.202 **

  • VME-Bus Karte GI0DSP with processor TMS320C206 (25ns)
    with piggyback PB202
  • GI0DSP.401 **

  • VME-Bus Karte GI0DSP with processor TMS320C206 (25ns)
    with piggyback PB401

** customer specific product


Information  
   

For further information please contact Gi-Electronic.
All data without guarantee, technical subject to change.

 

Main Page Contacts Contacts
Cookies make it easier for us to provide you with our services. With the usage of our services you permit us to use cookies.
Ok Decline